Home > How to Remove > Surface Prep for Refinishing
Surface Prep for Refinishing
Prepare various surfaces for refinishing including antique furniture, fiberglass, glass, metal, counter tops, flooring, natural stone, tile, concrete, wood, porcelain, and plastic.
Shake well before use. Spray liberally to coat the area. For paint splatter, or thick stubborn coatings, allow a longer set time. Do not let EZ Strip dry out as it will stop working, if EZ Strip does dry out, re-apply. Determine performance time by test scrubbing a small area every few minutes until material is easily removed.
Recommended dwell-times:
Grease, Hand Prints, Grime, Dirt: 2 – 5 min
Heavy Buildup of Grime, Oil, Dirt: 5 min
(remove with a bristle brush or scrub pad)
Paint Splashes, Wax, Adhesive Residues: 5 – 10 min or longer
(remove with a bristle brush or scrub pad)
Set times will vary depending on type, thickness, and age of material being removed.
To finish, wipe with a damp cloth. Must be neutralized with water or EZ Strip residue will continue to work. Allow the surface to dry completely before sanding or painting. Repeat steps if necessary.
* For best performance use EZ Strip above 10°C (50°F). Do not use in direct sunlight. Do not freeze.
* We make no guarantee of results and assume no liability for damages incurred by use or misuse of this product. Use EZ Strip products only as directed. May Etch Some Plastics.
Warning: Before starting any paint or textured coating removal project that may contain lead or asbestos please be sure to test it first. Test kits are inexpensive and typically available at your local hardware store or online.
If your test is positive for lead or asbestos, EZ Strip strongly recommends that you contact a qualified, licensed restoration or renovation contractor in your area for advice and a quote. Licensed contractors will have the training, employees, safety equipment and disposal facilities available to handle the project.
Paint Disposal: EZ Strip encapsulates paint being removed and is safe to be disposed of in your household garbage. However, if you suspect there could be lead in the paint you want to remove, test it first. Lead based paint must be disposed of in accordance with the laws of your area of residence.
